Find SMD LED 0603, High Brightness Lamp Beads, SMD LED High Brightness Lamp Beads on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > SMD LED Diode > SMD LED 0603 high brightness lamp beads

SMD LED 0603 high brightness lamp beads

  • SMD LED 0603 high brightness lamp beads
  • SMD LED 0603 high brightness lamp beads
  • SMD LED 0603 high brightness lamp beads
  • SMD LED 0603 high brightness lamp beads

SMD LED 0603 high brightness lamp beads

Basic Info

Model No.: SMD LED 0603

Product Description

SMD LED 0603 high brightness lamp beads


Because of its high brightness and low energy consumption, LED light bars are often used in building decoration, advertising light boxes, jewelry display stands and other constant-light equipment, but what aspects should be considered when customizing LED light bars In-line LED lights?

1. Look at the solder joints. The LED light bar produced by the regular LED light bar manufacturer is produced by SMT chip technology, using solder paste and reflow soldering process. Therefore, the solder joints on the LED light bar are relatively smooth and the amount of solder is small, and the solder joints extend from the FPC pad to the LED electrode in an arc shape. However, the amount of solder in the solder joints of the counterfeit version of the LED light bar is uneven, and most of the solder feet are covered by a dot, and at the same time there will be different degrees of tin tips. This is a typical phenomenon of manual soldering.

2. Look at the quality of FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off Patch Light Emitting Diode. If the copper-clad board is bent too much, the pad will fall off, and if the temperature is too high during maintenance, the pad will fall off.

3. Look at the cleanliness of the surface of the LED Strip. If the LED light bar produced by SMT process is used, the cleanliness of the surface is very good, and no impurities and stains can be seen. However, if the counterfeit LED light bar is produced by hand soldering process, no matter how it is cleaned, there will be stains and cleaning marks on the surface, and there will be flux and tin residue on the surface of the FPC.

4. Look at the packaging. Regular LED Strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static and moisture-proof packaging bags on the outside High power lamp beads 1W. The counterfeit version of the LED light bar will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look closely at the reel, you can see that there are marks and marks left by the removal of the label on the outside.

5. The standard LED light bar will be enclosed in the box with instructions for use and light bar specifications, and it will also be equipped with an LED light bar connector or card holder; while the fake version of the LED light bar box does not have these accessories , Because some manufacturers can save or save after all.

Learn these six methods to determine the quality of LED light bars, all quality LED light bars will not escape your eyes.
.02pt;" class="ke-zeroborder">
Origin: Guangdong Export or not: Yes Order No.: 12458794
Brand: XiGe Article No.: 5897619 Model: 1206
Size:1206 Power: 0.5 (W) Color rendering index: 80
Luminous flux: 10 (LM) Forward voltage: 12 (V) Reverse voltage: 12 (V)
ESD:12(V) Rated current: 10 (a) Chip brand: San'an
Chip size: 5 (MIL) Phosphor brand: customizable Glue brand: customizable
Wire material: gold wire Bracket material: Copper Luminous angle: 15 (°)
Luminous efficiency: 100 (LM / W) Thermal resistance: ≤ 50 (° / W) Maximum allowable junction temperature: 100 (°)
Voltage temperature coefficient: 5 (MV / ℃) 1000 hours conventional aging: 85% 6000 hours conventional aging: 20%
Lm-80 test passed: Yes Color temperature range: 10 (k) Cross border export source: Yes
Highlight Smd Led 01Highlight Smd Led 02Highlight Smd Led 03Highlight Smd Led 05Highlight Smd Led 06Highlight Smd Led 07Highlight Smd Led 08Highlight Smd Led 09Highlight Smd Led 10Highlight Smd Led 11Highlight Smd Led 12Highlight Smd Led 13


Dongguan Sige Electronics Co., Ltd.

 Dongguan Sige Electronics Co., Ltd., Dongguan City, Guangdong Province, was established in 2006. It is a high-tech manufacturer of electronic semiconductor components composed of a group of vigorous and energetic personnel with many years of industry experience. The company is located in a vibrant modern city-Dongguan, with convenient transportation. At present, the main products are brightness red, green, blue, yellow, orange, pink, amber, orange, colorful lights, 5050 three-color (RGB), four-color (RGBW.RGBY) piranha, white light-emitting diodes, traffic lights , Outdoor display screen (pixel lamp); infrared emitting and receiving diode; cover components; SMD series of light-emitting patch components; digital tube and dot matrix; point light source backlight, etc., rich in varieties and all available. We have always adhered to the people-oriented management philosophy, with the purpose of "emphasizing practical results, focusing on innovation, and advocating quality", to create a good atmosphere of unity and cooperation and forge ahead. The company's leaders have rich industry technical capabilities and management experience, and the main body of the company is composed of young people with a spirit of hard work and the courage to pioneer and innovate. With the joint efforts of all the employees of the company, while providing comprehensive services to our customers, Sigurd has also established a good corporate image for the company, and the company's development is thriving and has achieved a broader range.

Company Info

  • Company Name: Dongguan Sige Electronics Co., Ltd.
  • Representative: Mr Huang
  • Product/Service: SMD LED , In-line LED , Illumination LED , Light Emitting Diode LED , High-power LED , Lamp Bead Patch
  • Capital (Million US $): 500,000RMB
  • Year Established: 2020
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 11% - 20%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 11
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: Fewer than 5 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): Below 1,000 square meters
  • Factory Location: Room 202, Building 4, No. 3, East Siheng Road, Lianhu, Tangxia Town, Dongguan City, Guangdong Province
  • Contact Person: Mr. Huang Yiyu
  • Tel: 86--13751262319
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters